Skip to main content

Tag: Superior Asphalt

Paving and pavement marking contracts approved

Paving, street marking contracts approved

HOLMES BEACH – City commissioners recently approved a contract with Superior Asphalt to mill and resurface various streets and roads throughout the city.

The total cost of the work approved on Nov. 14 is not to exceed $324,307. The commission also approved a contract with McShea Contracting for pavement marking services. The total cost of the pavement marking is not to exceed $203,281.

The contract with Superior Asphalt doesn’t name the specific city streets to be milled and resurfaced, nor does the bid proposal that the company submitted in response to the invitation to bid that the city issued in September.

Superior Asphalt’s bid proposal does include the estimated number of square yards to be milled and resurfaced. The proposal estimates 17,619 square yards of S-3 Friction Course asphalt will be laid down at a thickness of 1.5 inches and 375 yards of S-1 Structure Course asphalt will be laid down at a thickness of 3 inches.

Paving and pavement marking contracts approved
Superior Asphalt’s bid proposal references the estimated square yards of milling and resurfacing work to be done. – City of Holmes Beach | Submitted

The Superior Asphalt bid proposal notes Turtle Infrastructure Partners will be subcontracted for the pre-resurfacing milling work that includes removing the top inch and a half of existing pavement and milling the pavement edges. The bid proposal estimates 2,500 square yards of existing pavement will be milled down at a depth of 1.5 inches and 3,788 square yards of edge milling will be performed.

Street selection

During the Nov. 14 meeting, Public Works Superintendent Sage Kamiya explained how the specific areas to be milled and resurfaced will be selected. Kamiya said the new contract is a continuation of previous street resurfacing done by Superior Asphalt.

“We think we can probably do about 10 roads. We’re going to need to give them those specific locations. That’s why there’s not a specific list here. Some of that will depend on how the dollar goes. There is a limit in their contract, so we won’t exceed that. It’s a one-year contract. It could be extended up to two years. One of the things we run into with resurfacing is the cost of pavement is based on oil (prices) and that fluctuates a little bit. In the good, we can do more. In the not-so-good, we do less. We did include a $20,000 adjustment to make sure we make the best use of this request for proposals,” he said.

Paving and pavement marking contracts approved
Public Works Department Superintendent Sage Kamiya explained the selection process for the city streets to be resurfaced. – Joe Hendricks | Sun

Kamiya said the city has used Superior Asphalt for the past two years and their working relationship dates back several years.

“They’ve done good by us. It’s a great relationship. We’re looking forward to continuing it,” he said.

Kamiya said the Superior Asphalt bid was the lowest in terms of price and the most appropriate overall. He said the milling and resurfacing work will be funded by half-cent sales tax revenues the city receives from the county.

“You gave us the money to take care of the roads so we’re going to do it before it (the price) goes up,” Kamiya said.

Pavement marking

According to the pavement marking bid proposal submitted by McShea Contracting, the pavement marking will take place in the following areas:

  • Gulf Drive from E. Bay Drive to White Avenue – approximately 2.8 miles.
  • Marina Drive from Palm Drive to 56th Street – approximately 0.5 miles.
  • Palm Drive from Gulf Drive to Marina Drive – approximately 0.7 miles.
Paving and pavement marking contracts approved
This map illustrates where the pavement markings and striping will be upgraded. – City of Holmes Beach | Submitted

According to the invitation to bid issued by the city, “This contract intends to remove existing pavement markings and replace with thermoplastic paint striping, RPMs (raised pavement markers) and pavement markings for approximately 4 miles of public streets.”

The pavement markings will include new center lines, edge markings, reflective markers down the center of the roads, bike lane striping and repainting the faded crosswalk markings.

When discussing the pavement marking contract with the city commission, Kamiya said, “This is a little bit of a newer conversation. We’ve not specifically talked about putting markings on the roadway. There are national guidelines and some local requirements for us to make sure we maintain the pavement markings.

Kamiya said he wasn’t sure when the pavement markers were last maintained, but it’s been a long time.

“A lot of the reflectors in the middle of the road are gone,” he said.

Kamiya noted that Gulf Drive and Marina Drive are the most traveled roads in the city and the thermoplastic striping material has an estimated life of three to seven years.

Speed tables to be modified

Speed tables to be modified

ANNA MARIA – The city of Anna Maria intends to modify three speed tables recently installed along South Bay Boulevard.

The speed tables were installed on the 500, 600 and 800 blocks of South Bay Boulevard as part of a recent street paving project. They were the source of public displeasure and concerns expressed by some residents and property owners during the city commission’s May 26 meeting. Those concerns included noise and the slow speed required to pass over the speed tables in order to avoid injury, damage and jostling the contents of the vehicles.

Mayor Dan Murphy addressed the speed table concerns again during the commission’s June 9 meeting.

“We brought in our engineer to take a look at the speed tables to see if they were designed to specifications. Of the three there on South Bay, two were close to specification and one (on the 500 block) was considerably out of specification. All three of these speed tables would need to be softened with more asphalt. Superior Asphalt did not build them to specification,” Murphy told the commission.

Speed tables to be modified
The speed table on the 500 block of South Bay Boulevard is further out of spec than the speed tables on the 600 and 800 blocks. – Joe Hendricks | Sun

The mayor presented the commission with two options: remove some or all the speed tables at a cost of $4,000 each or request that Superior Asphalt make the needed modifications. The proposed modifications would include adding more asphalt to the approach areas to decrease the severity of the approach angle in order to lessen the impact and increase the speed at which the speed tables can be driven over. The proposed modifications also include creating gaps in or alongside the speed tables that would allow bicycles to avoid traveling over them.

Commissioner Deanie Sebring suggested using reflective paint to make approaching motorists more aware of the speed tables they’re about to encounter.

As she did during the May 26 discussion, South Bay Boulevard resident Pat Olesen again asked the commission to remove or relocate the speed table installed near her home on the 500 block of South Bay Boulevard. The commission did not grant that request.

Resident Dave Haddox told the commission the National Association of City Transportation Officials recommends that speed tables include a flat area in the center of the angled approach areas, with a total length of 22 feet and a maximum height of 3-3.5 inches so vehicles can travel over them going at least 25 mph.

Haddox also said he’s watched golf cart operators avoid the speed tables by veering onto the adjacent grass and sidewalks. In response, Murphy said it’s illegal to drive a golf cart on a city sidewalk and violators could receive a citation from the Manatee County Sheriff’s Office for doing so.

All five commission members were in favor of modifying and reevaluating the speed tables rather than removing them at this time. No timetable was provided as to when the speed table modifications will be completed.

Related coverage

 

Speed tables produce compliments, complaints